Safety Instructions - Intex KOM0327 Bedienungsanleitung

SAFETY INSTRUCTIONS

Read the instruction manual carefully before first use and keep it for future reference.
1. The appliance should be connected to a power supply as per specification in the
operating instructions or as marked on the appliance.
2. Place the device in a properly ventilated place. Make sure to place this product on
flat, dry and stable surface.
3. Protect this product from moisture, humidity, water and any other liquid. Avoid using/
storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
4. Product suitable for indoor use only.
5. Clean the unit's exterior periodically with a soft, slightly damp cloth. Never use
chemical agents to clean this device.
6. Never use this device if the power cord is damaged.
7. Fixed power cable may only be replaced in an authorized service point.
8. Power cord protection: power-supply cords should be routed so that they are not
likely to be pinched by items placed upon or against them.
9. Disconnect the device from the power supply if it is not going to be used for a long time.
10. Do not attempt to repair or dismantle this device yourself. In case of damage, contact
with an authorized service point for check-up/repair.
11. This appliance may be used by children who are above 8 years old and by persons
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised and guided by a person who is responsible for
their safety in a cautious manner, and all the safety precautions are understood
and followed. Children should not play with this device. Children should not perform
cleaning and servicing of the device unsupervised.
FEATURES
• 2.1 Computer multimedia speaker set
• USB port
• SD card reader
• AUX input
• Remote control
• Volume, bass, treble knobs
• FM radio
INSTALLATION GUIDE
1. Put the main unit between the satellite speakers and connect with provided cables.
Avoid short circuit when connecting.
2. Connect the audio source to the input on the subwoofer.
3. Connect the power supply cable to power mains socket and turn on the power
Owner's manual
EN
7