Flash Synchronization; Battery/Charger Specifications; Li-Ion Battery - Olympus E-330 Anleitung

Specifications
Flash
Synchronization
Flash control mode
External flash attachment : Hot shoe
External connector
USB connector/AV connector (Multi-connector)
Power supply
Battery
Dimensions/weight
Dimensions
Weight
Operating environment
Temperature
Humidity
En
Specifications
BLM-1 Li-ion battery
MODEL NO.
Product type
Nominal voltage
Nominal capacity
No. of charge and
discharge times
Ambient temperature
Dimensions
Weight
BCM-2 Li-ion charger
MODEL NO.
Rated input
Rated output
Charging time
Ambient temperature
Dimensions
Weight
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
22
: Synchronized with the camera at 1/180 sec. or less
: TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
: BLM-1 Li-ion Battery x1
: 140 mm (W) x 87 mm (H) x 72 mm (D) (5.5" x 3.4" x
2.8") (excluding protrusions)
: Approx. 550 g (1.2 Ib.) (without battery)
: 0 - 40 °C (32°F - 104°F) (operation)/-20 - 60 °C (-4°F -
104°F) (storage)
: 30 - 90 % (operation)/10 - 90 % (storage)

Battery/charger specifications

: PS-BLM1
: Rechargeable Lithium ion battery
: DC 7.2 V
: 1500 mAh
: Approx. 500 times (vary with usage conditions)
: 0 °C - 40 °C (charging)
-10 °C - 60 °C (operation)
-20 °C - 35 °C (storage)
: Approx. 39 mm (W) x 55 mm (D) x 21.5 mm (H)
: Approx. 75 g (without protection cap)
: PS-BCM2
: AC 100 V - 240 V (50/60 Hz)
: DC 8.35 V. 400 mA
: Approx. 300 mins. (approx. 5 hrs.) (room temperature:
if using BLM-1)
: 0 - 40 °C (32°F - 104°F) (operation)/-20 - 60 °C (-4°F -
104°F) (storage)
: Approx. 62 mm (W) x 83 mm (D) x 26 mm (H)
: Approx. 72 g (without AC cable)