Axis Q6034 Installationsanleitung Seite 11

AXIS Q6034 Installation Guide
8. Secure the camera using the supplied safety wire.
Ceiling bracket
Ceiling tile
9. Slide the unit holders on the network camera into the slots on the mounting plate and rotate
the camera unit.
10. Install the High PoE Midspan 1-Port, see
page 13.
11. Check that the indicator LEDs on the midspan indicate the correct conditions. See the table on
page 23 for further details.
12. Install the ceiling tile, with the camera mounted, into the ceiling.
13. Place the drop ceiling cover over the ceiling bracket and tighten the screws.
Safety wire
Install the AXIS T8123 High PoE Midspan 1-port,
Drop ceiling cover
Drop ceiling cover screws
Page 11
Hook for
safety wire
on