Daily Use - Jabra PRO 9460 Handbuch

1 settings icon: touch here to go to the settings
menu for your base and headset.
2 Battery indicator: indicates the current charge
level of your headset.
3 Current target phone: shows the current target
phone and indicates its status (ringing, online, etc.).
This is the phone to which you will connect if you
tap the headset multifunction button or touch the
activate-audio-link icon.
4 other phones: touch the appropriate icon here to
change the current target phone — or press the
headset multifunction button when no call is active
to cycle through available phones (press and hold
for about two seconds).
5 activate audio link: touch here to answer an
incoming call or activate the audio link to the
current target phone — or tap the headset
multifunction button when no call is active.
Please see the user manual for complete details.

DAILY USE

storing and charging the headset:
Whenever you are not using your headset, keep it in its
recharge cradle as shown below. It is held firmly in place
by a magnet.
1. 2.
US
The headset LED indicates whether it is charging
(constant yellow) or fully charged (no light).
Check the headset battery level indicated on the
touchscreen. Usually, the headset ships with the
battery partially charged.
note:
- charging occurs automatically, as soon as you
dock the headset in the cradle
- the headset is still in operation even while it is
charging
Wearing the headset:
- Always wear the headset with the microphone
positioned as close to your mouth as possible.
to place or answer a call over your desk phone:
1. Touch the desk-phone icon on the touchscreen
to make the desk phone the current target.
(If necessary — the largest of the phone icons
on the screen indicates the current target.)