TomTom Remote LINK Logbook Bedienungsanleitung Seite 5

EN
Preparing your Remote LINK
Installing your Remote LINK
To install your Remote LINK in your vehicle, first use the
adhesive pad to secure the mount to the dashboard or another
suitable surface which does not interfere with the driver's view
of the road.
Important: Do not mount the Remote LINK in the inflation area
of airbags or in the impact area of the head or knees. Search
carefully for a location that will avoid interference with
displays, safety equipment and controls.
1. To create a permanent installation, first attach the securing
lock to the mount.
Note: To remove your Remote LINK from the mount,
gently press the latch at the back of the securing lock and
then remove the device.
2. Attach the mount to a clean and flat surface using the
adhesive pad.
6