Axis Communications AXIS 212 PTZ Installationsanleitung Seite 4

Page 4
Description
Camera unit
Status
indicator
(LED)
Audio out
Dome casing for AXIS 212 PTZ
Cover
plate
Serial Number (S/N) - This is required during
installation. Please retain it for future reference.
The AXIS 212 PTZ/AXIS 212 PTZ-V is designed to be mounted on a wall or at an angle
using the angled wall mount. Positioned at an angle, the camera can monitor a specific area
such as, along a wall or corridor
AXIS 212 PTZ on angled wall mount
AXIS 212 PTZ-V on angled wall mount
AXIS 212 PTZ/ AXIS 212 PTZ-V Installation Guide
Microphone
Audio in
Angled wall mount
Tab
Angled wall mount
Tabs
Control
button
Power
connector
Power
Network
Network
indicator indicator
connector
(LED) (LED)
Dome casing for AXIS 212 PTZ-V
If necessary, cut
the plastic to route
the cables to the camera
I/O terminal
connector
Cover
plate