Package Contents - Axis Communications AXIS 212 PTZ Installationsanleitung

AXIS 212 PTZ/ AXIS 212 PTZ-V Installation Guide
Introduction
This guide provides instructions for installing the AXIS 212 PTZ/AXIS 212 PTZ-V Network
Camera on your network. For all other aspects of using the product, please see the AXIS 212
PTZ/AXIS 212 PTZ-V User's Manual, available from www.axis.com or on the Axis Network
Video Product CD.
1. Check the package contents against the list below.
2. Install the hardware on page 5
3. Set the IP address on page 7.
4. Set the password on page 13

Package contents

Item
Network Camera
Indoor power adapter
Note: The power adapter is country
specific, please check that the type of
power adapter you are using is correct
Extension cable
Terminal block connector
Mounting kit
Printed material
Important!
This product must be installed in
compliance with local laws and
regulations.
Title/Variants
AXIS 212 PTZ/AXIS 212 PTZ-V
Europe
UK
Australia
USA/Japan
Argentina
Korea
1.8m (5.9 ft.) Power cable
4-pin I/O connector block
Screwdriver for tamper-proof screws
Tamper-proof screws (16mm)
Drill template
Angled wall mount - inc. screws (12mm)
Screws (38mm) and plugs for wall mount
AXIS 212 PTZ/AXIS 212 PTZ-V Installation Guide
Axis Network Video Product CD
Warranty document
Page 3