Responsibilities; Designed Use; Predictable Misuse; Hazardous Areas - Herth+Buss CrimPro HV Bedienhinweis

Operating Instruction
In cases of a machine malfunction, production must
be stopped and the malfunction must be fixed before
continuing work with the tool.
EN
When working with the electro-hydraulic Battery Hand
Crimping Tool, do not wear loose clothing, jewellery or
long, loose hair that can get caught in the electro-hydraulic
Battery Hand Crimping Tool.
The electro-hydraulic Battery Hand Crimping Tool
should not be operated in pouring rain or under water.
Do not crimp on live cables or conductors
Too intensive use can cause heat damages for the tool
Pull the plug of the charging unit after charging.
The charging of the batteries must only be made with
generic chargers. (Time of loading: 15 minutes)
By nonuse of the battery outside the tool the red cover
has to be put on it.
Do not use the cord to transport the charging unit or
to pull the plug out of a wall socket with force.
Do not insert strange parts into the ducts of the
charging unit.
Do not disassemble the charging unit or battery.
No other batteries e.g. dry batteries or car batteries etc.
are permitted to be used neither in the tool nor in the
charging unit.
Do not place the battery in your pocket or in your toolbox
if there are any conductive materials in it such as coins,
keys, tools or other metallic parts.

2.3 Responsibilities

The electro-hydraulic Battery Hand Crimping Tool may only be
operated by suitably trained and authorized personnel. The user
must clearly define and observe the responsibilities of the per-
sonnel for operation, set-up, maintenance and service.
Should the user make any changes to the machine without con-
sulting the manufacturers or the suppliers, the latter will not be
liable for any damage that may result.

2.4 Designed Use

Realization of connections by crimping a terminal to a cable
Cutting of cable up to Ø 54 mm
The electro-hydraulic Battery Hand Crimping Tool is designed for
use with the adapter and die sets. The adapters should only be
used with the dies specified by Herth+Buss.

2.5 Predictable Misuse

Every application which is not mentioned in chapter 2.4
www.herthundbuss.com

2.6 Hazardous Areas

Hazardous Area:
Person at risk:
Type of Hazard: Hand Injuries (cuts form sharp edges)

3. Delivery

3.1 Scope of the delivery:

Toolcase with foam:
Basis tool:
Battery:
Battery charger:
Operating instruction:
Operating instruction battery charger:
95942951
Area of interchangeable
crimping dies/ Cutting Head
Operator
1 pcs.
1 pcs.
1 pcs.
1 pcs.
1 pcs.
1 pcs.
10