Midi Operation; Learn Mode; Midi Channel Assignment - Lexicon MPX 550 Bedienungsanleitung

MIDI Operation

LEARN MODE

Learn Mode enables the MPX 550 to "learn" MIDI
Program Change and Continuous Controller messages.
To activate and deactivate Learn Mode, press the Store
and Tap/Cancel buttons simultaneously. The Store and
Tap/Cancel LEDs will light to indicate that Learn Mode is
active. The front panel display will then show the current
patching for EDIT knobs 1 to 4 (Edit Page 1). To access
knobs 5 to 20, press the Edit Pages to cycle to the desired
Edit Page.
The unit supports learned patches for Bypass and Tap, as
well as all available parameters controlled with the front
panel Edit knobs.
Press the Store and Tap/Cancel
buttons simultaneously to activate
and deactivate Learn Mode.
6-2
The parameters controlled with the EDIT
knobs can be patched to Continuous
Controller messages.

MIDI CHANNEL ASSIGNMENT

A single, selectable MIDI channel is used for all MPX 550
messages. This channel can be assigned in System Mode
with the MIDI Channel parameter.
Note:
A MIDI channel should be assigned before MIDI
features are used.
Bypass and Tap/Cancel can be
patched to Program Change and
Continuous Controller messages.
Lexicon
Program Change
messages can be used
to load programs.