Lexicon MPX 550 Bedienungsanleitung Seite 47

MPX 550
GATE/INV
Gated reverbs were created by feeding a reverb, such as
a metal plate, through an analog gate device. Decay
time was set to instant, while hold time varied duration
and sound.
The Gate programs provide a fairly constant sound with
no decay until the reverb is cut off abruptly. These
programs work well on percussion, particularly on snare
and toms. It is recommended to experiment with other
sound sources as well.
Note:
Adjusting the Time or Duration parameters will
cause the selected program to reload. The System
Mode parameter Program Load Mode determines
whether the system will mute or bypass during
program load.
Gate/Inv Programs
10 StraightGate
11 Slope Down
12 Drum Gate
13 140ms,TapPre
14 240ms,TapPre
15 340ms,TapPre
16 440ms,TapPre
17 540ms,TapPre
18 Inverse
19 Dark Inverse
Program Descriptions
"Adjust" Tap
(Time) –
(Time) –
(HighCut) PreDelay
(1/32 Note)
(HighCut) PreDelay
(1/32 Note)
(HighCut) PreDelay
(1/32 Note)
(HighCut) PreDelay
(1/32 Note)
(HighCut) PreDelay
(1/32 Note)
(HighCut) PreDelay
(1/32 Note)
(Time) –
(Time) –
4-3