Dawicontrol DC-2976 UW Kurzanleitung Seite 22

- 22 -
/SN=x,..,x This parameter specifies the devices to be operated in Synchronous
Data Transfer mode if this mode is supported by these devices,
independent of the Windows settings. Entering "/SN=1,4", for example,
enables the synchronous mode for SCSI-IDs 1 and 4. Hostadapters
supplied with a SCSI setup ignore this parameter and use the setup
settings instead
/!DISC=x,..,x Specifies the devices for which the "disconnect" settings of Windows
device manager are to be ignored and with it this function is not
available..
Quick Guide