Online USV YUNTO Q 450 Benutzerhandbuch Seite 19

Installation
• Connect the UPS system only to socket outlet with earthing contact
(Schuko-socket outlet).
• The building wiring socket outlet (Schuko-socket outlet) must be easily
accessible and close to the UPS system.
• Use only VDE-approved, CE-marked power cable (e.g. the power cable of
your computer) to connect the UPS system to the building wiring socket
outlet (Schuko-socket outlet).
• Use only VDE-approved, CE-marked power cables to connect the loads
to the UPS system.
• Do not connect domestic appliances such as hair dryers to UPS output
sockets.
• Do not connect appliances or items of equipment, which would overload
the UPS system (e.g. laser printers), to the UPS outlet socket.
• Place cables in such a way that no one can step on or trip over them.
• This is operator installable.
• The UPS can be operated by any individuals with no previous experience.
• With the installation of the equipment it should prevented, that the sum of
the leakage current of the UPS and the connected consumer does not
exceed 3.5mA.
Operation
• Do not disconnect the mains cable on the UPS system or the building
wiring socket outlet (Schuko-socket outlet) during operation since this
would cancel the protective earthing of the UPS system and of all
connected loads.
• The UPS system features its own, internal current source (batteries).
The UPS output sockets may be electrically live even if the UPS system is
not connected to the building wiring socket outlet.
• In order to fully disconnect the UPS system, first press the
then disconnect the mains lead.
• Ensure that no fluids or other foreign objects can enter the UPS system.
19
switch