Superior SONIA Installationsanleitung Seite 9

- Fix the top closure (2) with the 4 M5X16 screws supplied. Face the
piece arrows as shown opposite. (Fig. 9)
Fig. 9
- Mount the two seals (8) for the convective airflow compartments by
securing them with the 4, 4.2x13 screws supplied. (Fig. 10)
Fig. 10
8
- Thread the Ø 75 mm pipe (not supplied) through the tank seat.
- Connect the fan output (1) to the flexible pipe (E) using a clamp (F).
(Fig. 11)
Fig. 11
1
F
- Secure the fan (1) with the 3, M5x16 screws supplied. (Fig. 12)
Fig. 12
5
2
DT2034126-00
DT2034127-00
E
DT2034128-01
DT2034215-00
H07031710 / DT2002252 – 02
- Use a set of pliers to bend the side tab on the guard (3) as indicated
opposite. (Fig. 13)
Fig. 13
5
- Thread the cable (4) through the guard (3) hole and connect its
terminals to the fan (1) as shown in the wiring diagram. (Fig. 14)
Fig. 14
1
- Secure the guard (3) with the M5x16 (5) screws supplied. (Fig. 15)
Fig. 15
- Fix the cable using the clamp (7) supplied, as shown opposite. (Fig.
16)
Fig. 16
3
3
3
7
DT2034066-00
4
DT2034067-00
5
DT2034129-00
DT2033962-00
9