Troubleshooting - Fritel Profi series Gebrauchsanleitung

Rinse thoroughly and wipe with a soft towel.The FRITEL cleaner for fryers contains
natural enzymes. So it's environment-friendly, biodegradable and non-toxic. The
FRITEL cleaner for fryers can be applied to all materials like stainless steel,
synthetic, enamel, etc.
VI. TROUBLE SHOOTING
Do not use the appliance, when damaged. First go through the following check-list:
1.The fuse blows :
 Let the deep fryer cool off first, remove the problem, then press the Reset
button. The deep fryer is ready to be used again.
2.The deep fryer does not heat up :
 The safety thermostat is interrupted: Press the Reset button
 The safety switch is interrupted: The control panel is not mounted correctly onto
the sliders, the bowl is mounted falsely, or one of the sliders has broken off. In
the first two cases : mount the fryer correctly. In the last case : note the data in
the cord storage, then go to your sales point.
3.The oil gives off smoke or boils over :
 The oil/fat is old or degraded: Replace the oil/fat
 The chosen temperature is too high : Choose a lower temperature
 The fried food contains too much water or contains too much redundant ice.
4.The fried food is too greasy :
 The oil/fat is old and degraded: Replace the oil/fat
 The chosen temperature is too low : Choose a higher temperature
 If the supply cord is damaged, immediately bring your deep fryer to your sales
point.
5. If the supply cord is damaged, immediately bring your deep fryer to your sales
point.
If you still haven't repaired the defect, please call your sales point.
The appliance has been developed for household use. When using it for
professional purpose, the conditions of warranty will change. Any damage
caused due to incorrect use (non-observance of this user manual) will cancel
the warranty.