Motorola H690 Bedienungsanleitung Seite 9

English
Pairing your headset
Your phone's Bluetooth feature is off by default. To use your headset, turn
on the Bluetooth feature in your phone. Please check your phone's user's
guide.
Note : The Bluetooth feature remains on until you turn the feature off.
Before you can use your headset, you must pair it with your phone.
1 Ensure headset is in pairing mode
Remove headset from desktop charger and power on by sliding Power
switch to the ON position (towards Power symbol on headset).
The indicator light first flashes during power up, then initiates easy pairing.
After a few moments, the indicator light will be steadily lit in blue to indicate
headset is in pairing mode.
If the headset does not enter into pairing mode, see "Troubleshooting"
section.
2 Set your phone to look for your headset
• Perform a device discovery from the phone. For details about device
discovery, consult your phone's user's guide. The phone lists Bluetooth
devices it finds.
• Select Motorola H690 in the list of discovered devices and confirm by
following the on-screen prompts.
• When prompted by the phone, enter the passkey 0000 and confirm.
Pairing is successful when the headset indicator light changes from steadily
lit to flashing blue and purple.
6