VALERA VOLUMISSIMA Übersetzung Der Originalanweisungen Seite 3

•Make sure the unit is perfectly dry before using it.
•Do not put the appliance on heat sensitive surfaces during use.
•After use always switch the unit off and remove the plug from
the power supply socket. Do not pull on the wire to remove the
plug from the power supply socket. Do not pull the plug out of
the power supply socket when your hands are wet.
•Always allow the unit to cool before putting it away and never
wrap the cord around the unit.
•Check that the cord has not been damaged from time to time.
•Prevent the cord from coming into contact with the metal parts
while these are still hot.
•Use the unit on dry hair.
•Do not use this unit on wigs that have synthetic hair.
•The elements used to pack the unit (plastic bags, cardboard
box, etc.) must be kept out of reach of children as they are a
potential danger to them.
•This unit must only be used for the purposes for which it is
expressly intended. Any other use is to be considered
improper and therefore dangerous. The manufacturer accepts
no responsibility for damage caused by improper or erroneous
use.
•Do not use hair spray while the unit is running.
•Keep the plates clean and free of dust, hair spray, styling gel,
etc.
•To avoid dangerous overheating, it is advisable to unwind the
entire length of the cord
OPERATING INSTRUCTIONS
Parts
1. Appliance
2. Plates
3. ON/OFF switch
4. Temperature switch
Switching the appliance on and off
To switch the appliance on, simply plug it in to an electrical socket and move the switch (fig. 1, ref. 3) to "I".
To switch it off, move the switch (fig. 1, ref. 3) to "0" and remove the plug from the socket.
Important: never leave the appliance unattended when on.
Temperature settings
To set the temperature for use turn the switch (fig. 1, ref. 4) to the desired value.
You can select different temperatures depending on the type of hair to be treated:
up to 150°C for fine, straight hair
up to 210°C for fine, wavy hair
up to 230°C for thick, curly hair
Guide to red and green indicator light (fig. 1, ref. 5 and 6) operation:
• red indicator light illuminated: appliance in operation
• green indicator lights flashing: ready for use, set temperature reached
• green indicator lights illuminated (fixed light): plate heating in progress
• green indicator lights off: plate cooling in progress.
5. Red indicator light
6. Green indicator light
7. Locking device
5