Conceptronic CLLSPK51 Schnellstartanleitung Seite 16

ENGLISH
The following RCA connectors must be combined in the converter cable:
c. The third method to connect an audio source is through the Line-In port on
the Remote Control.
Use the 3,5mm Jack to 3,5mm Jack cable supplied with the speaker set to
connect your MP3-Player, Discman, I-Pod, etc. to the speaker set.
F. Plug the power cable to an AC outlet.
G. Switch on the audio source to which the speaker is connected.
H. Make sure that all the knobs (Volume) are at the minimum settings.
I. Put the power switch on at the back of the subwoofer and switch on the speaker
system pushing the power button on the remote control. The LED on the remote
control will light up.
J. Adjust the volume knob on the remote control. You can alter the bass knob at the
remote control to adjust the sound effect.
The Conceptronic Multimedia Speaker System 5.1 is now ready to use!
•
"Front-Right" and "Front-Left" to 1x 3,5mm Jack
•
"Rear-Right" and "Rear-Left" to 1x3,5mm Jack
•
"Center" and "Subwoofer" to 1x3,5mm Jack
16