Technical Support - D-Link DAP-2660 Installationsanleitung

Mounting with a ceiling bracket
Installation
1. Clip two ceiling brackets onto the ceiling
panels. Make sure both brackets are in
line with each other.
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.

TECHNICAL SUPPORT

United Kingdom (Mon-Fri) , Website: http://www.dlink.com
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri), Website: http://www.dlink.com
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times
6
Ceiling crossbar
Ceiling bracket
3. Plug the Ethernet cable into the LAN
port on the access point.
4. Place the DAP-2660's male bracket
in the mounting bracket's female
bracket. Click DAP-2660 and the
mounting bracket to lock in position.
D-Link DAP-2660 Quick Install Guide