Herunterladen Inhalt Inhalt Diese Seite drucken

Inserting The Smartcard Into Ca Module; Checking Ca Module Information; Hdmi Connection; Audio Return Channel (Arc) - Sharp LC-32LD170E Bedienungsanleitung

Lcd-farbfernsehgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
Conncting a USB device or external devices
• Video playback via a USB device may not be possible
or the playback quality affected if the device data
transfer speed rating is too low�
• File number over 1000 may not be displayed�
• No quickly operation between play / pause /
fast forward / rewind�
• The video might get judder or unsmooth when USB
read/write speed is under requirement(some Full HD
format)�
• Files in USB 1�1 devices may not be played properly�
• Some video file formats may not be played depending
on the file�

Inserting the Smartcard into CA module

In order to receive coded digital stations, a Conditional
Access module (CA module) and a Smartcard must
be inserted into the CI (Common Interface) slot of the
TV�
The CA module and the Smartcard are not supplied
accessories� They are usually available from your
dealer�
Inserting the Smartcard into the CA module
1�
Carefully insert the CA module into the CI slot
with the contact-side forward�
2�
The logo on the CA module must be facing
outward from the rear of the TV�
NOTE
• It takes about 30 seconds to certify the license key
when you insert a Smartcard into the CI+ compatible
CA module for the first time� This process may fail
when there is no antenna input or you have never run
"Auto installation"�
• The CI+ compatible CA module sometimes upgrades
its firmware� You may not receive any TV images before
upgrading� You can only use the power button during
upgrading�
• The CI+ compatible CA module does not allow you to
output any copy protected programmes using monitor
out�
• If the TV displays an update confirmation message
for the Smartcard while receiving CI+ compatible
broadcasts, follow the screen prompts�
• Make sure that the CA module is properly inserted�
12 -

Checking CA module information

After inserting and activating the CA module, make
sure the input source is TV�
NOTE
• This menu is only available for digital stations�
• The content of this menu depends on the provider of the
CA module�
Module: General information on CA module displays�
Menu:
Adjustment parameters of each Smartcard
displays�
Enquiry: You can input numerical values such as
passwords here�

HDMI connection

System Standby
• When set to "On", turning off the TV will
automatically turn off the connected HDMI-CEC
compliant device �

Audio return channel (ARC)

The TV can send audio data for video content shown
on the TV to a connected audio device with just one
ARC-compatible HDMI cable� Using this function
eliminates the need to use a separate digital or
analogue audio cable�
Connection for using "Audio return channel"
• You need to use ARC-compatible cables/devices
and connect to the HDMI 1 terminal to activate this
function�

Supported display resolutions

Computer formats (PC)
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
60Hz
1024 x 768
60Hz
1280 x 768
60Hz
1360 x 768
60Hz
1280 x 1024
60Hz
Video formats
Resolution
Refresh rate
480i
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
50Hz, 60Hz
1080i
50Hz, 60Hz
1080p
(HDMI only) 50Hz, 60Hz, 24Hz

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis