RUSTA 624013460101 Gebrauchsanweisung Seite 5

INSTALLATION FOR SPRINKLER SET
1. Screw the timer inlet securely
to a garden tap.
2. Place the filter in the inlet of
the pressure reducer.
3. Attach the pressure reducer
to the timer.
4. Use the tap adapter and
hose connector if you want
to construct a system after
the pressure reducer with the
sprinkler set.
5. You can start using the timer
once the sprinkler set is
attached.
6. Set the desired watering time
by setting the FREQUENCY and
RUN TIME. Instructions for this
can be found on page 6.
7. Turn on the tap.
8. Once the set watering time has ended, the timer
switches off the water flow.
9. Turn off the tap.
• The tap can be turned on or off at any time during the
watering time.
• The timer continues to count down the watering time even
after the tap has been turned off.
1
2
3
4
See the instructions for
Rustas sprinkler set.
5