Guzzanti GZ-315 Gebrauchsanleitung Seite 55

Firstly Re-install the filter after the filter baffle plate in the dust container. Place to
match up with the both ventilation positions.
Secondly assembling the dust container following up the opposite procedures when
detaching the dust container.
Cleaning the roller brush
If the roller brush becomes blocked or jammed for any reason, the vacuum will be
lower down. The roller brush may then need to be cleaned. First turn off the device, and
then carefully use a pair of scissors or a sharp knife to remove any items such as threads
that may have become entangled.
If the roller brush needs to be lifted out – open the hatch cover by turning the locking
screw anti-clockwise with a coin or other tool. The hatch cover will come slightly free
and can now be removed.
Lift out the roller brush and clean it. Replace the roller brush and make sure that it fits
into its guiding tracks, and make sure that it can spin freely.
Place the hatch cover and lock by turning anticlockwise as far as possible.
Cleaning of wheel axles
If a wheel is jammed by threads or dirt:
Remove the wheels by carefully prizing them loose using a screwdriver inserted into
the cavity. Remove threads or any other objects that may have become jammed in the
wheels axles. Reassemble the wheels by pressing them tightly together.
Servicing or repairs
In case of breakdown or faults, the device must be taken to an authorized service
centre.
Technical data
Vacuum cleaner model: GUZZANTI - GZ315
Cleaner working voltage: 18V
Motorized cleaning head model:
Cleaning head working voltage: 18V
Adaptor model: YLS0241A-E220080
Adaptor input: 100-240V 50/60Hz
Adaptor output: 22V 800mA
Battery pack: 3.6V/5pcs
Disposal
If the device is to be disposed of, the batteries should be removed. Used
batteries should never be disposed of with household waste. These should
always be taken to a recycling station.
7