Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Unpacking and assembly
Check that all the parts in the box. Parts breakdown see page 2.
1. Assemble the battery
2. Fit the charging station closely
3. Fit the electrical brush by carefully inserting it into the vacuum compartment.
4. Position the charging station close to a mains socket (well away from heat sources
or wet places). Insert the adaptor into the mains socket and connect the charging
station.
Charging
Insert the adaptor into the mains socket (Note: Always make sure that the device is
turned off ) and then connect to the device. The indicator light will flash once the
device has made contact with the adaptor.
5
Werbung
