Guzzanti GZ-315 Gebrauchsanleitung Seite 54

It takes 3-4 hours or so to fully charge the batteries before the first use, the light will
stay on once it is full charged. In order to ensure that it is always ready for use, the
device should be left on connection with adaptor when not being used. The adaptor
may become warm during charging-this is normal.
Vacuuming floors and carpets
You should regularly check that the nozzle cushions and the brush roller are clean in
order to avoid scratching sensitive floors.
Start the device by pushing the on/off button away from you.
Vacuuming tables, furniture, car seats etc.
Remove the hand unit by pressing in the release buttons. The hand unit will now come
free and can easily be removed.
The crevice nozzle can be fitted in order to reach awkward places.
Emptying/cleaning
Careful cleaning of the dust container and filters
1. Remove the whole dust container by pressing the release button and turning the
dust container off.
2. Pulling out the filters and emptying the contents of the dust container into a
suitable vessel or bag.
(The filter can be shaken clean or cleaned and rinsed using warm water. Make sure
that the parts are dry before they are assembled.)
3. Re-install the components
6