Weed Removal; Shutting Down; Care; Transport - Kärcher WR 10 Originalbetriebsanleitung

 Switch on the high pressure cleaner
and pull the lever of the high pressure
gun.
 Wait until hot water emerges from the
spray bar.
 The temperature indicator changes with
the increasing water temperature.
The colour of the indicator fields chang-
es from left to right from black to brown.
 When the bar is coloured completely
green at the right, the device is ready for
operation.

Weed removal

 Guide the spray head slowly over the
weeds.
 Repeat the procedure several times if
required.
Note
The optimal effect has been achieved when
the hot water flows with almost no pressure
and a light steam formation.

Shutting down

WARNING
Risk of burns! Let the WR 10 cool down be-
fore removal.
 After operation, spray cold water
through the spray head for 2 minutes to
allow it cool down.
 If necessary, rinse the spray head with
clear water.
 Check the spray head regularly for
blockage of the nozzles.
Mind the weight of the appliance during

transport.

 Consider the weight of the appliance
when storing it.
 Store the appliance in a frost free area.

Troubleshooting

Steam escaping from the spray head:
 Reduce the temperature setting on the
high-pressure cleaner.
The emerging water pressure is too
high:
 Mount power nozzle in screw connec-
tion.
 Select a suitable power nozzle (see ta-
ble).
High-pressure cleaner switches off/the
high-pressure cleaner burner does not
start:
 Check the nozzles on the spray head
for contamination.
 Check the spray head for calcification.
Accessories and Spare Parts
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.

Technical specifications

Working width
Target input temperature min.
Target input temperature max.
Weight (kg)
– 3
EN

Care

Transport

Storage

WR 10
100 mm
90°C
100°C
0.3
7