Initialization with the Easy base unit
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition (the device still has the factory settings):
- select the "Application
in the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the "Application
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure A).
The device acquired by the Easy base unit will be listed, with the number assigned, in
the channels of the "Application
Insert the device into a Chorus support, making sure the potentiometer edges are at
the top.
Complete the installation with other Chorus devices or hole covers and fix it to the
relative container (flush-mounted box, wall-mounted box, etc.).
Apply the finish plate.
INSTALLATION
New function" or "Application
Search device" menu in the Easy base unit;
New function" or "Application
Completing installation
20
Edit function" menu
Edit function" menus.