General Description - Gewiss Chorus GW 10 756 Bedienungsanleitung

The movement detector with Easy twilight switch - flush-mounted allows you to send
timed activation commands to actuator devices using the KNX/EIB bus through which it
connects to the Home Automation system, according to the movements detected and
the light measured by the two built-in sensors.
The passive Infra Red (IR) sensor has an adjustable lens with fixed opening.
The detector is powered by the bus line and is fitted with two potentiometers on the
front, for local regulation of light sensitivity levels and the local variation of the
transmission period (+/- 50% of the value set via the base unit), and a green indicator
LED that signals movement detection and the consequential messages sent to the bus.
The sensor can be configured using the Easy base unit (GW 90 831) to send timed
activation commands. It is possible to set the functions on the device so that they
activate only movement detection when the actuator to be commanded is ON
(conditioned detection).
This function mode allows you, for instance, to switch on lights in the traditional manner
(using a button or similar fitting) whilst guaranteeing the automatic switch-off function
once the area covered by the movement sensors is liberated.
The device functions are inhibited for approx. 60 secs at switch-on, i.e. the time needed
to stabilise the IR detector.
The device is fitted inside a standard flush-mounted box, mounted on Chorus supports
in the space of two modules.

GENERAL DESCRIPTION

Summary
17
E
N
G
L
I
S
H