Performing Initial Settings - JVC Everio R GZ-RY980HE Grundlagen Benutzerhandbuch

Performing Initial Settings

When turning on this unit for the very first time, perform the initial settings by selecting
the display language and setting the built-in clock. All other operations cannot be
performed until the initial settings are complete.
Open the LCD monitor.
1
This unit turns on and the language
0
selection screen appears.
Set the language to be used
2
English
Français
Deutsch
Español
Italiano
Nederiands
.
Tap the 32 buttons to select the
0
language you want to use, then tap
the [SET] button.
Set the time zone, date and
3
time
UTC
.
Move the cursor using the 0 1
0
buttons to select the items to set.
Change the numerical value using
0
the 32 buttons.
After the setting is complete, tap the
0
[SET] button to set the clock
according to the time signal.
EN
8
Language
Initial Setting
- - - -
Resetting the Clock
Set the clock from [Date/Time] in
the [System] menu. To reset the
time zone, select [System]Æ[Time
Zone].
A Open the LCD monitor.
The unit turns on.
0
B Tap [MENU].
C Select [System] and tap the
[SET] button.
D Select [Date/Time] and tap the
[SET] button.
The setting method after this is
0
the same as step 3 as described
earlier.
NOTE
The clock is reset about one
0
month after the battery is
depleted. Therefore, the time
zone and date/time setting
screens will appear the next time
the unit is turned on. Set the clock
again after charging the battery.