Installing The 1-U Kmm Tray In The Rack - Dell PowerEdge 15FP Installationsanleitung

F i g u r e 1 - 5 .
10-32 x 0.5-inch flange-head
Phillips screws and washers
(5 sets per slide assembly)

Installing the 1-U KMM Tray in the Rack

Pull the left- and right-slide rails out of the slide assemblies until you feel the rails lock
1
in the fully extended position.
Align the 1-U KMM tray rails with the fronts of the slide rails, insert the tray rails into
2
the slide rails, and push the tray steadily into the rack (you may need to give an extra
push at one point to overcome the locking mechanism) until the metal shipping
brackets on the sides of the tray touch the vertical rails of the rack. See Figure 1-6.
1-10
I n s t a l l a t i o n G u i d e
I n s t a l l i n g t h e V e r s a R a i l s S l i d e A s s e m b l i e s
slide assemblies (2)
front of rack
mounting-
bracket
flange