TaoTronics TT-BA09 Handbuch Seite 5

Pair in RX mode:
1. Set the TT-BA09 to RX mode and connect it to your
non-Bluetooth audio receiving device.
2. Turn on the TT-BA09 and tap the Power Button twice to enter
pairing mode.
3. Activate the Bluetooth® function on your transmitting device
– phone / tablet, and search for the nearby Bluetooth®
devices.
4. Find "TaoTronics TT-BA09" in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid
blue.
Note:
• The adapter will enter pairing mode automatically when
powered on for the rst time.
• The original pairing memory will be cleared after a mode
switch. It will automatically start pairing each time it's
powered on.
• The adapter can remember previously paired devices and
will attempt to pair with devices automatically, without going
into pairing mode.
Pair with two devices at the same time
In TX mode:
• In TX mode, the adapter is able to pair with two Bluetooth
stereo earphones/speakers at the same time.
1. Follow the previous instructions in the "Pairing" section to pair
the TT-BA09 with your rst device.
2. Turn off the Bluetooth function on your rst device, tap the
Power Button twice to pair and connect to your second
device.
3. Turn on the Bluetooth function on your rst device. In
approximately 10 seconds, the rst device will automatically
connect in.
Note:
• When you pair with two devices, both can play music at the
same time.
• The adapter will automatically re-pair when powered on.
05/06