Fuse Replacement; Mounting Diagram - Chauvet DJ Wash FX Schnellanleitung

Wash FX™ QRG
AC Power
Power Linking

Fuse Replacement

Mounting

Mounting Diagram

Wash FX™ has an auto-ranging power supply that works with a voltage range of
100–240 VAC, 50/60 Hz.
Power linking is when products are daisy chained together through their Power In
and Power Out sockets, so that many products can be powered from one outlet.
For the maximum number of Wash FX™s that can be power linked at 120 V or at
240 V, see the User Manual or the label on the product.
The User Manual
http://www.chauvetlighting.com/product-manuals-literature/.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the holder and replace it with a fuse of the exact
same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Before mounting this product, read the Safety Notes. Make sure the mounting
clamps (such as CLP-15 clamps from CHAUVET®) are capable of supporting
the weight of the product. For the CHAUVET® line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html.
Hanging/Mounting Bracket
Bracket
Adjustment
Knobs
Safety Cable
is available from
4
the CHAUVET®
Mounting Clamp
Front View
Back View
EN
website: