Using The Chronograph - Silva ADC WIND Benutzerhandbuch

8.1 Chronograph Mode -
Lap Time
(the chronograph
is counting in the
background)
CHRONO
GRAPH
0:00.00
00
Chronograph Mode
('Zero' Display)
Note:
This diagram illustrates the
general flow among different
functional displays only, and
may NOT conform to fact in all
instances.

Using the Chronograph

CHRONO
RUNNING
0:00.00
1L 01
Lap No.
Chronograph Mode
(Lap Time Display)
10 seconds [reset]
CHRONO
[set]
RUNNING
0:00.00
01
counting
Chronograph Mode
(Counting Display)
Elapsed Time [set]
(the chronograph
is stop counting)
CHRONO
[reset]
STOP
0:00.00
20
Chronograph Mode
(Stop Counting Display)
Chronograph Function
!
In 'Zero' Display, press the [set] button once
to start the counting. When it is counting,
press the [set] button again to stop the
counting, and the elapsed time of which the
chronograph is counting will appear.
!
When the elapsed time is displaying, repeat
the key operations above to get the
accumulative elapsed time or press the
[reset] button to reset the chronograph.
Check the below 'To Reset the Chronograph'
section for more detail on how to reset the
chronograph.
To Record a Lap Time
!
When the chronograph is counting in the
previous operations, press the [reset] button
to display Lap Time Display for 10 seconds.
!
When the Lap Time is displaying, the
c h r o n o g r a p h r e m a i n s c o u n t i n g i n t h e
background.
To Reset the Chronograph
!
To reset the chronograph, to be ready for a
new operation, press the [reset] button once
when the chronograph has stopped counting.
The display will then return to 'Zero' Display.