Hama 00118655 Bedienungsanleitung Seite 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• Attachment bar (2x) • Installation kit (see contents, Fig. 1)
• TV support arms (2x) • Drilling template
• TV base plate • These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
3. Safety Notes
Warning
• Given the multitude of terminal devices and wall structures available on the
market, the supplied mounting kit is unable to cover every option.
• In some cases, the screws for attaching the terminal device to the product on the
wall bracket are too long.
• Please note that the supplied wall plugs are for use with concrete brick and solid
brick walls only.
• Read the operating instructions for your terminal device before attempting to
mount it. The instructions provide information about the type and measurements
of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from a specialised dealer.
• If the installation surface on which the bracket is to be mounted is made of
different materials or construction types to those specified, purchase suitable
mounting materials from a specialised dealer.
• Never apply force during installation. This may damage your terminal device or
the product.
• If in doubt, have this product mounted by a qualified technician - do not attempt
to mount it yourself!
Note – Commercial use
• If the device is used commercially, increased duty of care requirements apply.
• Therefore, please observe the accident prevention regulations of the German
employer's liability insurance association for electrical systems and equipment.
Please also observe all accident prevention regulations from other applicable
employer's liability insurance associations and accident insurance companies, as
well as any legal regulations applicable to the particular industry and/or location.
• The wall bracket must be installed by trained personnel or by a special technician,
especially when installed in schools, educational institutions, hobby/self-service
workshops or other publicly accessible institutions.
• Secure the product and the attached load against falling using suitable equipment
(e.g. an arresting cable) and in accordance with locally applicable regulations.
• We strongly recommend these additional safeguards even if they are not legally
required.
• Have trained personnel carry out regular inspections to ensure that the product
is securely installed, properly functioning and in acceptable condition (we
recommend inspections at least every 6 months, or more frequently if required for
the particular location) and then document these inspections.
• Do not mount the product above locations where persons might linger.
• Once you have mounted the product and the attached load, check that they are
sufficiently secure and safe to use.
• You should repeat this check at regular intervals
(at least every three months).
• When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions is
attached.
2
• Make sure that the product is loaded symmetrically.
• During adjustment, ensure that the product is loaded symmetrically and that the
maximum permitted carrying capacity is not exceeded.
• Maintain the necessary safety clearance around the attached load (depending on the
model).
• In the event of damage to the product, remove the attached load and stop using the
product.
4. Intended use and specifications
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
Maximum load bearing capacity:
Screen size:
Distance to the ceiling:
Angle:
Pivoting range:
Mounting plate dimensions:
Mounting holes:
5. Installation requirements and installation
Note
• Only mount the bracket with the help of a second person. Get the support and
help you need.
• Different end devices have different options for connecting cables and other
devices. Before installation, ensure that the necessary connections will still be
accessible after installation.
• The same mounting kit is included with all of our TV brackets. Depending on
the product and mounting type, you may not need to use the entire mounting
kit. Unneeded screws and other small parts may be left over, even if the bracket
is properly mounted. Keep the leftover parts and the operating instructions in a
safe place, in case you might need them later on (e.g. should you move, sell the
product, mount the bracket in a different location, buy a new TV, etc.).
Warning
• Before installing the bracket, ensure that the wall on which the television is to be
mounted is suitable for the weight and make sure that no electrical wires, water,
gas or other lines are located at the installation location.
• Please note that the provided wall anchors are only approved for concrete and
solid brick walls.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.)
• The desired height should be chosen during installation. (Fig. 2)
6. Setting and maintenance
Note
Only adjust the Bracket with the help of a second person. Get the support and help
you need.
• To adjust the inclination and horizontal angle, loosen the mounting screws, set the
desired inclination and angle, and then tighten the screws securely once more. (Fig.
1c, 6b)
• Secure by inserting the carrying arms into the wall plate and tightening both screws.
• Check that the bracket is secure and safe to use at regular intervals (at least every three
months). Only use water or standard household cleaners for cleaning.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
50 kg
81.0 - 165.0 cm (US: 32" - 65")
126.8 – 176.8 cm
up to -25°
up to 360°
20 x 6 cm
according to the VESA standard 400x400