Kenwood KAX970ME Bedienungsanleitungen Seite 3

This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
This KAX97XME attachment
features the Twist Connection
System and is designed to fit
directly on the latest generation
Kenwood Chef models (identified as
KVC and KVL series).
This attachment can also fit Kmix
kitchen machines featuring a slow
speed attachment outlet (KMX
series).
To check that this attachment is
compatible with your kitchen
machine you will need to ensure
both components feature the Twist
Connection System
If your kitchen machine features the
Bar Connection System
also need an adaptor before
operation is possible. The reference
code for the adaptor is KAT001ME.
For more information and how to
order the adaptor visit
www.kenwoodworld.com/twist.
before using for the first time
Wipe clean with a damp cloth. Do
G
not immerse in water.
key
adjustable knob
pasta feed roller
flat pasta attachment
to assemble
1 Lift off the slow speed outlet cover
by pressing the top and lifting off
2 With the attachment in position
shown, locate to the slow speed
outlet and rotate to lock in place
.
you will
.
.
3
to use your pasta maker
1 Make your pasta dough. Follow one
of the dough recipes supplied.
2 Set the adjustable knob on the side
of the pasta attachment to number
1 by pulling the knob out and
turning.
3 Flatten a piece of dough and
sprinkle some flour between the
rollers.
4 Turn the kitchen machine to speed 1
(you will see the rollers turning).
5 Pass the piece of dough through the
rollers repeating until you get a
smooth surface. (Folding the dough
in half across its width or length
between rollings will help to achieve
this).
6 Adjust the knob progressively from 1
to 9, each time re-feeding the
dough through the attachment to
achieve the desired thickness
Pasta thickness using settings 5 to
7 is recommended.
7 Cut the rolled pasta into
desired/manageable pieces.
Use as required.
using an additional
attachment
tagliatelle
(KAX971ME)
tagliolini
(KAX972ME),
trenette
(KAX973ME),
and spaghetti
1 To use these attachments you must
have rolled out pasta using the flat
pasta attachment (KAX970ME) first.
2 To fit any of the additional
attachments available, follow the "to
assemble" instructions.
3 Feed the rolled out pasta through
the pasta attachment and the
different cutters will slice the pasta
to create different pasta variations
.
4 Pasta can be left for up to 4 hours
before cooking.
,
(KAX974ME)
.