Performing A Functional Test - Linde Safety Guard Originalbetriebsanleitung

4
Operation
Pre-shift checks

Performing a functional test

DANGER
Faulty displays possible!
 Always perform a functional test before starting
work.
NOTE
The warning zones are pre-configured by the
manufacturer. They must be adapted to suit
the local conditions during initial commissi-
oning. To do this, contact the service partner.
Functional test of the Safety Guard
display unit
During the functional test, the set warning
zones are checked. Two people are required
for the testing.
 Switch on the industrial truck.
The display unit switches on.
 Switch on the mobile warning unit and
attach the unit to your clothing.
 Walk around the industrial truck in a spiral
shape with the mobile warning unit. During
this time, the driver checks the display unit.
During the test run, no fault messages or
irregularities must appear on the display unit.
 If necessary, have the warning zones set up
again by the service partner.
36 Operating Instructions – 3008011701 EN – 12/2018
1 2 3 4