Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Operating instructions
Quartz movement. The electrical energy provided by the battery causes the quartz in
the interior of the watch movement to oscillate 32,768 times per second. This high
frequency gives great accuracy. The seconds hand advances in steps. Important : Do
not leave the crown
with the time function.
Setting the time
1. Pull out the crown
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts again, allowing
perfect synchronization with a time signal.
* stop seconds according to model
Setting the date
1. Pull out the crown
2. Turn the crown clockwise to set the date.
3. Push the crown back in completely to position (p0).
Setting the universal-hour indicator
1. Pull out the crown
2. Set the universal-hour indicator disk by turning the crown in the desired direction.
3. Push the crown back in completely (p0).
in position (p1) for longer than 20 minutes, as this might interfere
completely to position (p2): the seconds hand stops*.
to position (p1).
to position (p1).
5
Werbung
