Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Operating instructions
Caliber 2893-2
Setting the time
1. Pull out the crown
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts again, allowing
perfect synchronization with a time signal.
Setting the date and the universal-hour indicator disc or the 24-hour hand (according to
model)
1. Pull out the crown
2. Turn the crown counterclockwise to set the date and clockwise to set the universal-hour
indicator disk or the 24-hour hand.
3. Push the crown back in completely (p0).
Note: Rapid date correction is not possible between 8 p.m. and 2 a.m.
Caliber 2893-3
Setting the time
1. Pull out the crown
2. Set the time by turning the crown in the desired direction.
3. Push the crown back in completely to position (p0): the seconds hand starts again, allowing
perfect synchronization with a time signal.
Setting the universal-hour indicator
1. Pull out the crown
2. Set the universal-hour indicator disk by turning the crown in the desired direction.
3. Push the crown back in completely (p0).
completely to position (p2): the seconds hand stops.
to position (p1).
completely to position (p2): the seconds hand stops.
to position (p1).
10
Werbung
