Error Messages - 2in1 BASIC Gebrauchsanweisung

ERROR MESSAGES

Appear when inserting a used test strip.
Re-test with a new test strip.
This error message indicates the test strip
may be inserted incorrectly or have a
problem. Repeat to remove and re-insert
the test strip or repeat the test with a new
test strip.
This error message indicates the 2in1.®
BASIC has problem. Review the instructions
and re-test with a new test strip. When this
messages appears again, contact the local
distributor.
Appears when working temperature is
BELOW or ABOVE system operation
range. The system operation range is
10C~40oC(50 ~104oF). Re-test after the
working temperature reach to the above
range.
34