Replacing The Battery - 2in1 BASIC Gebrauchsanweisung

REPLACING THE BATTERY

STEP 1
Prepare the 3V Lithium Button Cell
(CR2032) for replacement. Slide the
battery cover off to arrow direction.
STEP 2
Remove the old battery and place the
new one in the tray while the "+" side
facing down.
Caution:
according to your local
environmental regulations.
STEP 3
Slide the battery cover back into place
and close fi rmly.
Important: If you do not replace
the new battery within one minute
after taking the old one out, you
must setup again the date and time.
Replace the battery do not aff ect
to the meter's memory and user
settings.
Dispose of battery
33