Camera Introduction - Instar In-8003 Bedienungsanleitung

1. Camera Introduction

The IN-8003 is the newest Full HD PIR Indoor and Outdoor IP Camera from
INSTAR. With a built-in passive infrared (PIR) motion sensor and four separately
configurable alarm areas that can be linked together, the camera prevents false
alarms and notifies you only when a real alarm has been triggered.
Equipped with one of the latest Panasonic Full HD CMOS image sensor, which
features low noise, high speed and new Wide Dynamic Range (WDR) function-
ality, the IN-8003 is able to achieve the best image quality in daylight as well as
clear image in night vision mode with the help of its high-power LEDs. Hence,
the IN-8003 is able to deliver accurate motion detection and alarm notification.
The design of this camera was completely new developed in order to fullfill the
wishes of our customers. If you need to pull the cable through the wall, a small
hole in the size of the cable diameter would be sufficient, as you can simply take
off the cable from inside the casing, pull it through the wall and connect the cable
back to the board inside.
This camera is running an embedded Linux operating system and a Webserver
which supports TLS/SSL encryption for security and privacy. It provides a built-
in, modern HTML5 based Web User Interface (WebUI) with focus on usability
and simplicity, supporting all recent devices (desktop, tablet, smartphone) and
operating systems (Windows, MacOS, Linux,...). Thanks to the built-in Camera
Setup Wizard and the (built-in) help function, INSTAR users can enjoy a very easy
initial set-up of the IP camera.
For your camera installation, please go to:
http://install.instar.com
2-EN
Go to http://install.instar.com