Instar IN-8003 Bedienungsanleitung Seite 25

1 - Bracket
2 - Photosensor
3 - Infrared LED
4 - Lens
5 - PIR Detector
6 - Microphone
7 - MicroSD Card Slot
8 - Reset
9 - Network LED
10 - Network Port
11 - Power Connector
4.3. Camera Tools
In the delivery content, you will find 3 tools for loosening the camera bracket,
opening the camera dome from the back to access the cables, and opening the
camera from the glass front to adjust the lens.
Alley Key
Go to http://install.instar.com
For Ceiling Mount
Twilight switch for IR LEDs
for Night vision - 12 IR-LEDs ( @ 850nm)
Wide-angle (focal length: 4.3mm / field of view: ~ 90º dia.)
Integrated passive infrared (PIR) motion detector
For noise detection / audio rec.
Slot for MicroSD/SDXC cards (max. 128GB - 16GB included)
- inside the camera -
Press 15-20 seconds for reset
Off: No Power / No signal, Flashing: Network Signal
RJ45 LAN port / connector for Cat5e LAN cable or higher
For included 12V / 1A power supply
6-EN