+2H: the LEDs switch on automatically at dusk and
then light up for 2 hours.
+4H: the LEDs switch on automatically at dusk and
then light up for 4 hours.
+6H: the LEDs switch on automatically at dusk and
then light up for 6 hours.
ON I: the LEDs light up in different colours and combinations.
Setup
Select a suitable location for setting up the appliance. This
location must fulfil the following criteria:
―
The TV Simulator may not be directly visible from
outdoors.
―
The flickering generated by the TV simulator must be
visible on the walls and/or ceiling from outdoors.
―
A power socket must be easily accessible.
―
The TV Simulator must be installed such that it can be
influenced by the twilight. This means that it must be
able to detect light from outside!
―
The TV Simulator may not be located near a window
which could be well lit from outdoors, such as on a
busy street or next to street lights.
―
There should be no additional time-controlled light
source in the room, e.g. a night light.
♦
Place the appliance on a firm and flat surface so that it
is stable and secure. To help prevent it from tipping over,
you can secure the stand with the adhesive strips.
CAUTION - PROPERTY DAMAGE
►
Do not use the adhesive strips to hang the appliance on
a wall! The appliance may fall down and be irreparably
damaged!
STS 12 B2
GB │ IE
│
27
■