Inhaltsverzeichnis
Werbung
Extent of delivery
Standard boiler
Accessories
Standard boiler
A boiler delivery package contains the
following components:
Component
Boiler fully assembled and tested
Adjustable feet
Syphon for condensate connection
Conversion kit for natural gas L and propane incl. instruction
Operation and Installation manual
Spare parts list
Wiring diagram
Integrated additional system controller , incl. all necessary
sensors and sockets (optional)
Accessories
Additional to the boiler, the following
accessories can be ordered:
•
Standard 3-step pump incl. connec-
tion kit;
•
Speed controlled pump incl. connec-
tion kit;
•
Safety valve, manometer and de-
aerator (3,4,5 or 6 bar) incl. connec-
tion kit;
•
2x max. water pressure switch and 1
external high limit thermostat incl.
connection kit;
•
Gas filter incl. connection kit;
•
Max. gas pressure switch;
•
External high limit thermostat incl.
connection kit;
•
Gas valve leakage tester (not possi-
ble for R6142);
•
Controlled bypass (incl. pump) incl.
connection kit;
•
Electronic kit for possibility to connect
room fan and/or external gas valve;
•
Plate heat exchanger (dT=10K/15K or
dT=20K) incl. connection kit;
•
Low velocity header, suitable for
dT=10K/15K and dT=20K incl. con-
nection kit;
Pcs.
1
4
1
1
1
1
1
1
•
Duo header for connecting 2 boilers
in cascade (excl. connection kit);
•
Weather compensated controller, also
suitable as room unit (incl. all necas-
sary sensors and sockets).;
•
Additional heating zone controller,
when controlling more than 2 zones
(incl. wall hung box, all necessary
sensors and sockets and connection
material for bus communication).
The above accessories are specially
designed for the R6000 boiler and
therewith easy to install (plug and play).
By choosing a combination of the kits
mentioned above, you can create your
own complete system solution. Ask
your supplier for more detailed
information.
Package
Mounted on wooden blocks with wooden border,
sealed in PE foil
Mounted on frame of the boiler
Cardboard box on top of heatexchanger
(under casing)
Cardboard box on top of heatexchanger
(under casing)
Map attached to back panel of the boiler
Map attached to back panel of the boiler
Map attached to back panel of the boiler
Integrated in electronic switchboard of the boiler.
Sensors and sockets in cardboard box on top of
the heatexchanger (under casing).
7
Werbung
Inhaltsverzeichnis
