Axis Q6055-C Installationsanleitung Seite 11

AXIS Q6055-C PTZ Dome Network Camera
How to install AXIS T8607 Media Converter Switch
The AXIS T8607 Media Converter Switch enables the multicable to send power from the power
supply (sold separately), and to send and receive data to and from external alarm devices and
the network.
For all information on installing the AXIS T8607 Media Converter Switch, see the separate
installation guide supplied with that product.
How to install the network camera
NO NO NO TICE TICE TICE
To comply with the IP66-rated design of the camera and maintain the IP66 protection, the
supplied multiconnector cable shall be used.
Remove the protective packaging between the camera and the sunshield before installing the
camera.
1. Install the selected bracket according to the instructions supplied with the bracket. If
drilling is required, make sure to use drill bits, screws, and plugs that are appropriate for
the material.
2. Route the multicable through the holes in the mounting bracket.
3. Secure the camera using the supplied safety wire.
11