System Info; Adapter For 100Mm Hose - Cameo INSTANT FOG 1700 PRO Bedienungsanleitung

Settings
Display = Configures the display and
Settings control key illumination and
canister illumination
Settings = Operating status for DMX
DMX Fail signal interruption
Settings = Automatic locking
Auto Lock Unit
SYSTEM INFORMATION (System Info)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "System Info" menu option and
confirm via ENTER.

System Info

ENTER
This will take you to the submenu for displaying the device information. Use the UP and DOWN buttons again to select the desired
parameter, then press ENTER to call up the information.
System Info
Firmware = Displays the device firmware
Operating = Operating time display of the fog machine in hours
Hours

ADAPTER FOR 100MM HOSE

An adapter for a 100mm hose is included in delivery. The adapter can be screwed onto the fog output nozzle when needed. Disconnect the
fog machine from the power supply (pull out the plug) and wait until the vaporizer of the fog machine has cooled completelycooled before
mounting the adapter.
Display and LEDs
On
Display
Off
Display and LEDs
Dark mode
DMX Fail
Hold
DMX Fail
Stop fog output
Auto Lock Unit
off
Auto Lock Unit
60sec
Display, control key, andcanister
illumination permanently on
Display off after 30 seconds of inactivity,
control key and canister illumination on
Display, control key, andcanister illumina-
tion off after 30 seconds of inactivity
last command will be held
Stops fog output
Automatic locking deactivated
Auto Lock is activated after approx. 60
seconds of inactivity(release byholding UP
and DOWN for approx. 10 seconds)
Software Version
Vx.xx
Operating Hours
Total: x
9