Sandberg 460-30 Benutzerhandbuch Seite 5

7) After the units have been paired for the
rst time, it is no longer necessary to
carry out the entire process above. When
you turn on the keyboard, it will
automatically be registered in the future.
3 Daily use:
3.1 Choice of unit:
You select the desired unit connected to
either Bluetooth-channel 1 or
Bluetooth-channel 2 by simultaneously
holding down the "Fn"-key and either the
"1"- or "2"-key. The indicator LED will
brie y show a light for the chosen channel.
The LED for the chosen Bluetooth channel
will continue to blink slowly to indicate that
it has been connected.
3.2 CapsLock:
The Indicator-LED named "A" will lighten
up when the "CapsLock"-function
(permanent capitalised letters) is chosen.
At the same time, the LED for the
Bluetooth channel, which it has been
chosen for, will blink slowly.
3.3 Choice of Operating System:
It is possible to set the keyboard to
function optimally with the operating
system that the connected units use. When
the relevant unit has been connected, you
hold down the "Fn"-key at the same time
as one of the blue symbols on the keys
"Q", "W" or "E" for choosing respectively
"iOS (Apple)", "Android" or "Windows".
3.4 Key missing or doesn't t
As this keyboard is universal, it has been
adapted to the applicable industry
standards for external "HID"- keyboards
via Bluetooth. However, as the market
consists of different products from
thousands of hardware producers and
many generations of operating systems in
addition to a mix of different language
versions, it is possible that the character
you see printed on a key is not the same as
on your screen. In this case, check the
settings on your unit where you may be
able to change the set-up for external
keyboards for the best adaptation.
We hope you will enjoy your new
keyboard!
3