ABB i-bus 6120 U-101-500 Betriebsanleitung Seite 16

GB
Adjustment of the Bus Coupler
To Allocate the Group Address(es)
• The group addresses are allocated via the PC using the
ETS2.
To Select the Application
The mode of operation of the Bus Coupler is independent
of the type of sensor/actuator (application) used. The
relevant ABB application data is on the EIB product data-
base CD-ROM.
Application Differentiation
The application is selected via the ETS 2 software. Other
data to be loaded in respect of the application selected is to
be found in the ABB database.
The possibilities of these applications are described in the
appurtenant, separate Operating Instructions of the FM
sensors.