Auto Program - JVC InteriArt AV-28T35SPE Bedienungsanleitung

AUTO PROGRAM

You can automatically register the TV
channels which can be received well at your
residence in the TV's Programme numbers
(PR) by performing the following.
1 Choose AUTO PROGRAM. Then
press the a a a button a
The COUNTRY menu appears as a sub-
menu of the AUTO PROGRAM function.
There are two COUNTRY menus.
Pressing the yellow button changes the
COUNTRY menu as follows:
2 Press the 5 5 and 6
5 5
choose the country where you are
now located
3 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically registered in the
Programme numbers (PR).
• To cancel the AUTO PROGRAM
function, press the b button.
After the TV channels have been
registered in the Programme
numbers (PR), the EDIT menu
appears.
• You can proceed to edit the
Programme numbers (PR) using the
EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 28.
6 buttons to
6 6
• If you do not need to use the EDIT/
MANUAL function, go to the next
step.
4 Press the a a button to display the
a a
T-V LINK menu
5 If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure
"Downloading the data to VCR" on
page 33 to transmit the Programme
number (PR) data.
• When your TV can detect the TV
channel name from the TV channel
broadcast signal, it automatically
registers the TV channel name (ID) to
the Programme number (PR) in which
the TV channel has been registered.
• If a TV channel you want to view is
not set to a Programme number (PR),
manually set it using the MANUAL
function. For details, see "EDIT/
MANUAL" on page 28.
• The TV channel is not registered in
Programme number PR 0 (AV). When
you want to register a TV channel to
PR 0 (AV) manually set it using the
MANUAL function. For details, see
"EDIT/MANUAL" on page 28.
Using the TV's menu
27