Operating Elements - HEIDENHAIN ND 1300 Quadra-Chek Installationsanleitung

ND 1300 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
Connecting optical edge detector cables
This product provides optical cable connectors for comparator light source reference and
comparator screen sensor.
To connect an optical cable:
Verify that the power switch is in the off position
X X
Insert the optical cable into the connector
X X
Hand tighten the cable connector until snug
X X
Connecting an audio cable
This product provides a 3.5 mm connector for use with headphones or speakers.
To connect an audio cable:
Verify that the power switch is in the off position
X X
Insert the audio cable into the connector
X X
Connecting a USB cable
This product provides a USB connection for printer and data storage device
communication. For more information on USB communications, refer to the
ND 1300 QUADRA-CHEK Operating Instructions.
To connect a USB printer or data storage device:
Verify that the power switch is in the off position
X X
Insert a printer USB (type A) cable or a USB data storage device into the products USB
X X
port

7. Operating elements

Front
Wide keys: Programmable for
A
frequently used functions
LCD touchscreen
B
Send key: Transmit measurement
C
data to PC, USB printer or USB drive
Front (cont)
Numeric keypad: Enter numeric
D
data
Command keys: Control
E
measurement
LCD on/off key: Turn LCD on or off
F
or delete features from the feature
list.
16 17
Optical connector
18
Audio connector
19
USB connector
17