bosfor UZK 01 Gebrauchsanleitung Seite 16

Do not clean the appliance when operating.
Do not clean the appliance with pressurized water.
TROUBLESHOOTING
Fault
The appliance is not
operating
The appliance makes
metallic sounds
Lack of power supply
Possible Causes
The plug may not
connected
The main switch may be
turned off
The cover of the appliance
may be left open
The appliance may
damaged
Foreign body may get into the
appliance
The grate or the blade may not
be snapped on the housing
properly
The blade or the grate may
grow dull
The plug may be connected
improperly
Plug cable may be torn and/or
there may be lack of phase
Table – 5 Troubleshooting
Actions to be taken
be Connect the plug to power
supply
Bring the main switch from 0
to I position to turn on
Make sure the cover of the
appliance is closed
Stop the appliance, pull the
be
plug from the socket, check the
appliance
Stop the appliance, pull the
plug from the socket, check if
there is foreign body in the
appliance
Stop the appliance, pull the
plug from the socket, check the
blade or the grate
Sharpen the blade or the grate
Check the plug and adjust if
necessary
Open the cable and check if
there is any fault if necessary
15