ACCU-CHECK Rapid-D Link Gebrauchsanweisung Seite 12

Disconnect Accu-Chek Rapid-D Link
WARNING
Please consult with your health care professional on how to compensate for any missed
insulin while you are disconnected. Carefully monitor blood glucose level while discon-
nected from the pump and after you reconnect.
Step 1
Turn off the pump.
Step 2
Grasp the two halves of the coupling and turn for a quarter of a turn in an anticlock -
wise direction. Pull the two halves of the coupling away from each other, proceeding with
caution.
Step 3
Cover both halves of the coupling with the protective caps (L).
Reconnect Accu-Chek Rapid-D Link
Step 1
Remove the protective caps from the two halves of the coupling.
Step 2
Start distribution through the pump. Fill the transfer set until the medication starts trick-
ling out of the tip of the connector needle (I).
10